Table of Contents
Advertisement
Configure HART
Follow the below steps to configure a HART
1. Log in to FDM Server Management Tool using valid credentials.
2. On the homepage, click Network Configurator.
3. Select the RS-232 HART Modem network from the Network Type drop-down list.
4. Once the HART
Address values will be auto selected to "0". User cannot enter any value in these
fields.
5. Click OK to save the network configuration. Now the configured network will be
available in FDM Client.
Add DD File in FDM Client
Refer to
Add DD File
section for more information.
Revision 1
device in FDM Server Management Tool
device in FDM Server Management Tool:
Modem network is selected, the Start Poll Address and End Poll
Figure 3: Configure HART
SLN700 Series HART
device in FDM
Option User's Manual
Page 5
Advertisement
Table of Contents
