Table of Contents
Advertisement
Remove a Bale Clasp SFP or SFP+ Module
Figure 30: Removing a Bale Clasp SFP or SFP+ Module
5. Place the SFP module that you removed on an antistatic mat, or immediately place it in a static shielding
bag if you plan to return it to the factory.
6. Protect your line card by inserting a clean SFP module cage covers into the optical module cage when
there is no SFP module installed.
Hardware Installation Guide for Cisco 8011-2X2XP4L PLE Service Endpoint Router
50
Install the Device
Advertisement
Table of Contents
