Table of Contents
Advertisement
Upload
Upload lets you copy the actuator's configuration to the PDA. You can then download that configuration
to other actuators.
Step
1
From the Home page, select the Upload prompt. Below is a picture of the Upload screen page
which will appear.
From the display above the description name can be altered from the default description of
unit type and its current software version number, to anything you wish it to be.
To exit the upload function, click the Cancel button.
To perform an Upload, click the Start button.
2
When the Start button is clicked, the configuration data is uploaded from the actuator to the
PDA in 6 different packets. You can watch the Status line for messages reflecting which
packet is currently being uploaded. The packets should have names associated to them like
Config and Config5. Each packet also has a byte size associated with it.
See picture below indicating currently uploading Config Data5 packet.
Release 3
8/02
Action
HercuLink™ - User Manual
HercuLink
Upload
21
Advertisement
Table of Contents
