Honeywell HVC0001 Quick Start Manual

Normal Operation
Display
(3 sec.)
Mode
Menu
Time
Menu
Select 24H or 12H
Configuration
Menu
Program +
Menu
+ The Program Menu is available
only if the controller is in
Daily On/Off Program Mode or
Customized Cycle Program Mode
HVC0001/HVC0002
At end of Countdown Mode
After 5 sec.
Set Countdown Countdown Mode
Time (minutes) is activated
ASHRAE 62.2 Daily On/Off
Program Mode Program Mode
Set Hour
Set Backlight Set Daylight
Saving Time
if the controller is in
Daily On/Off Program Mode
if the controller is in
Customized Cycle Program Mode
Manual Customized Cycle
Mode Program Mode
Set Minutes Set Year
Set On Time Set Off Time
Set Run Time Set Idle Time
HVC0001/HVC0002
The default settings are shown on the flowchart.
Briefly press this button to go
to preceding menu or setting.
Briefly press this button to
go to next menu or setting.
Briefly press this button to accept
setting and display next parameter.
Press this button for 3 seconds
to enter or exit the setup menus.
The controller automatically exits the setup menus
if you do not press any button for 60 seconds.
Set Day
Set Month
69-2319EFS-01 2009-03-24
Menu flowchart
ENGLISH
1/6