Stand-By Switch - Makita VC012G Instruction Manual

Shoulder belts
Fig.6
► 1 . Strap 2. Fastener
Upper belt
Fig.7
► 1 . Strap 2. Fastener
Carrying hook
Always grab the carrying hook when handling the vac-
uum cleaner body.
Fig.8
► 1 . Carrying hook
1
2
2
1
1

Stand-by switch

The stand-by switch is the switch to turn on/off the wireless activation
function. The vacuum cleaner is in the stand-by state regardless of
the switch position and it runs when the ON/OFF button is pressed.
Fig.9
► 1 . Stand-by switch
Switch position
AUTO I The vacuum cleaner is in the stand-by state
(ON) and the wireless activation function is available.
O The vacuum cleaner is in the stand-by
(OFF) state however the wireless activation
function is not available.
Switch action
To start the cleaner, simply press
off, press button again.
You can change the suction power of the cleaner in
three steps by press
button repeats the 1 to 3 mode in a cycle.
1
2
Fig.10
► 1. Suction power change button
Level
1
2
3
9 ENGLISH
1
Status
button. To switch
button. Each press on this
2. ON/OFF button
Indication Mode
Normal speed
mode
High speed mode
Max speed mode