Harness Cover - Makita VC012G Instruction Manual

When using the dust bag, insert the brim of the dust bag
into the slit.
2
3
Fig.27
► 1 . Slit 2. Brim 3. Dust bag
3. Align the hole of the filter bag with the hose cuff
and push the cardboard portion to the end. Make sure
that the rubber ring on the filter bag goes over the rim
on the hose cuff.
1
Fig.28
► 1 . Rubber ring on the filter bag 2. Rim on the hose
cuff 3. Cardboard portion of the filter bag 4. Hose
cuff
4.
Lock the front cover certainly.
CAUTION:
Be careful not to pinch your fin-
gers when hooking the latch, and when closing
the front cover.
1
1
2
3
4

Harness cover

Optional accessory
When using the harness cover, follow the procedure
below to attach it.
NOTE: When installing the harness cover, do not
mistake the front and back of the harness cover.
NOTE: The harness cover is washable. Follow the
washing instructions on the tag.
Fig.29
1.
Spread the harness cover on the harness.
Fig.30
2. Secure the harness shoulder straps with the hook
and loop fasteners of the harness cover. Hook the band
of the harness cover on the harness.
Fig.31
14 ENGLISH