Adjusting Belts; Stand-By Switch - Makita DVC665 Instruction Manual

Adjusting belts

The tightness of the shoulder belts, upper and lower
belts can be adjusted. Put your arms through the shoul-
der belts first then fasten the lower and upper belts.
To tighten, pull the end of the strap as illustrated. To
loosen, pull up the end of the fastener.
Lower belt
2
1
► 1 . Strap 2. Fastener
Shoulder belts
► 1 . Strap 2. Fastener
Upper belt
► 1 . Strap 2. Fastener
1
2
2
1
Carrying hook
Always grab the carrying hook when handling the vac-
uum cleaner body.
► 1 . Carrying hook

Stand-by switch

The stand-by switch is the switch to turn on/off the
wireless activation function. The vacuum cleaner is in
the stand-by state regardless of the switch position and
it runs when button is pushed.
► 1 . Stand-by switch
Switch position
AUTO I The vacuum cleaner is in the stand-by
(ON) state and the wireless activation function
is available.
O The vacuum cleaner is in the stand-by
(OFF) state however the wireless activation
function is not available.
Switch action
To start vacuuming, press
cleaner will start in the same suction power when you
turned it off previously. When you press
while the vacuum cleaner is running, the suction power
switches between normal (1) and higher (2) suction
power. To turn off the vacuum cleaner, press
7 ENGLISH
1
1
Status
button once. The vacuum
button
button.