Makita VC012G Instruction Manual page 12

The length of the wand can be adjusted.
With pressing the slide button, adjust the wand length.
The length is locked when releasing the slide button.
Fig.20
► 1 . Slide button
For the ring-type extension wand
Shoulder the vacuum cleaner body then twist and insert
the extension wand into the bent pipe assembly. To
disconnect, twist and extract it.
Fig.21
► 1 . Bent pipe assembly 2. Ring-type extension wand
3. Flexible rubber nozzle
NOTE: The flexible rubber nozzle can be attached to
the bent pipe assembly without pipe lock directly.
2
1
3
The length of the wand can be adjusted.
Loosen the ring on the wand and adjust the wand
length. Tighten the ring at your desired length.
1
Fig.22
► 1 . Ring
Hose hook
When you suspend the operation, the hook on the bent
pipe assembly can be used for hanging the wand on the
hanging part of the lower belt.
3
2
Fig.23
► 1 . Hook 2. Lower belt 3. Hanging part
Installing filter bag / dust bag
Optional accessory
CAUTION:
Always use the vacuum cleaner with the filter bag
properly installed. Otherwise the vacuumed dust
or particles may be exhausted from the cleaner
and they may cause respiratory disease to the
operator.
Install either dust bag or filter bag before using cleaner.
— Dust bag is usable many times repeatedly by
cleaning it out.
— Filter bag is a throw-away type. Throw away the
entire filter bag without emptying when it has
become full.
12 ENGLISH
3
1
Do not use a damaged filter bag.
1