Makita VC010G Instruction Manual page 16

Storage
When storing, remove the battery cartridge and store
the appliance on level place in upright position.
Fig.33
Cleaning the appliance body
From time to time wipe off the outside of the cleaner
(cleaner body) using a cloth dampened in soapy water.
Fig.34
Cleaning the HEPA filter
CAUTION:
Do not use the cleaner without a
filter or continue to use dirty or damaged filter.
Vacuumed dust or particles may be exhausted
from the cleaner and they may cause respiratory
disease to the operator.
NOTICE:
To keep optimum suction power and
clean exhaust, clean the filter periodically. If
enough suction power is not obtained even after
the cleaning, replace the filter with new one.
NOTICE:
To prevent the filter from being dam-
aged, do not use following tools and similar items
for cleaning:
— Air duster
— High pressure washer
Tools made of hard materials such as a wire
—
brush
1. Open the dust box cover and take out the filter
bag.
Release the hooks on the filter and remove the filter
from the appliance body.
Fig.35
► 1. Hook
2. Beat the dust off from the filter. The filter can be
washed with water. Rinse away the dust and particles
on the filter every 1 or 2 months. After that, dry the filter
completely in a shaded and well-ventilated place to
prevent unpleasant odor or malfunctions.
3.
To install the filter, insert the side without the
hooks into the groove, then push in the filter until the
hooks are secured with a click.
Fig.36
► 1. Groove 2. HEPA filter 3. Hook
16 ENGLISH
1
2
1
3