Indication Panel; Remaining Battery Capacity; Operating Mode - Makita VC010G Instruction Manual

Indication panel

Fig.16
► 1. Operating mode 2. Excess level of dust
3. Brushroll error 4. Remaining battery capacity
5. Battery check / lamp button

Operating mode

To change the operating mode, refer to the section for
switch action.
Excess level of dust
If this indicator lights up, replace the filter bag. (Refer
the section on removing the filter bag.)
NOTE: This indicator may not work depending on the
usage environment.
NOTE: The indicator automatically goes out approxi-
mately one minute after the appliance is switched off.
If you clear the clogging of the filter bag and restart
the appliance, the indicator goes out even within one
minute.
Brushroll error
Blinking
On
WARNING:
Immediately switch off the appli-
ance when this lamp lights up during operation.
Otherwise the motor malfunction may occur and a fire
may be caused.
NOTE: The lamp may blink if the height of the
brushroll is too low against the surface of the carpet.
In that case, adjust the height of the brushroll.
1
2
3
4
5
The brushroll is under high
load for some reasons.
The brushroll is stopped by
abnormal reason.

Remaining battery capacity

During operation, press the battery check / lamp button
to indicate the remaining battery capacity.
Fig.17
Battery indicator status
On
Battery check / lamp button
The following operations can be performed.
• Simply press the button to check the remaining
battery capacity.
• During operation, press and hold the button to turn
on / off the lamps.
11 ENGLISH
Off
Blinking
Remaining
battery
capacity
50% to 100%
20% to 50%
0% to 20%
Charge the
battery