Positioning Table - Grizzly T33901 Owner's Manual

Positioning Table

The table moves vertically, rotates 360° around its
center, rotates 360° around the column, and tilts
45° left or right. Remove any loose objects from
the table surface before adjusting the table posi-
tion using the controls shown in Figure 36.
Table Pivot
Lock Handle
Table Height
Lock Handle
Figure 36. Table adjustment components.
Raising/Lowering Table
Loosen table height lock handle (see
1.
Figure 36).
2. Raise or lower table by rotating table height
crank (see Figure 36), then tighten table
height lock handle to secure.
Rotating Table Around Center
Loosen table pivot lock handle (see
1.
Figure 36).
2. Rotate table to desired position, then tighten
table pivot lock handle to secure.
-30-
Table
Height
Crank
Pointer
Tilt Scale
Rotating Table Around Column
Loosen table lock handle (see Figure 36).
1.
2. Rotate table to desired location on column,
making sure to guide column rack with table
(see Figure 37), then tighten table lock han-
dle to secure.
Figure 37. Location of column rack.
Tilting Table
Tool Needed
Wrench or Socket 24mm ................................... 1
To tilt table:
Loosen hex bolt shown in Figure 38.
1.
Figure 38. Location of tilt lock hex bolt.
Tilt table until pointer aligns with desired
2.
angle on scale (see Figure 36).
Tighten hex bolt from Step 1 to secure table
3.
angle.
Model T33901/T33902 (Mfd. Since 07/23)
Rack
Qty