Positioning Table - Grizzly G0784 Owner's Manual

Positioning Table

The table rotates on its axis, moves vertically, piv-
ots 360 degrees around the column to accommo-
date larger workpieces, and tilts 60° left to right.
Rotating Table on its Axis
1. Remove any loose objects from table surface.
2. Loosen rotation lock handle shown in
Figure 22.
Rotation Lock
Handle
Rack
Figure 22. Table adjustment controls.
3.
Rotate table to desired position, then re-
tighten rotation lock handle.
Raising/Lowering Table
1.
Remove any loose objects from table surface.
2. Loosen table lock handles shown in Figure 22.
3. Adjust table height by rotating table elevation
crank (see Figure 22), then re-tighten table
lock handles.
Model G0784 (Mfd. since 03/15)
Table Lock
Handles
Table Elevation
Crank
Pivoting Table Around Column
1. Remove any loose objects from table surface.
2. Slightly loosen table lock handles (see Figure
22).
3. Pivot table to desired location, making sure to
guide rack shown in Figure 22.
4. Retighten lock handles.
Tilting Table
1.
Remove all objects from table surface.
2. Loosen three tilt-lock nuts shown in Figure 23.
Tilt-Lock
Nuts
Figure 23. Table tilt controls.
3. Tilt table until pointer aligns with desired
angle on scale (see Figure 23).
4. Retighten tilt-lock nuts.
Tilt Angle
Pointer and Scale
-25-