Moving Table - Grizzly G0781 Owner's Manual

Moving Table

The table travels in two directions and is con-
trolled by handwheels, as illustrated in Figure 17.
• Longitudinal (X-axis)
• Cross (Y-axis)
Longitudinal (X-Axis) Travel
(Left & Right)
Figure 17. Directions of table movement.
Both the X- and Y-axis feature table locks. To
ensure unexpected movement of the table does
not occur during precision operations, use these
locks to secure the table along any axis that
should not move for any given operation.
X-Axis
Lock Lever
Figure 18. Location of graduated dials.
The table handwheels have graduated dials in
0.001" increments, with one full revolution equal-
ling 0.0625". These dials provide an easy way to
gauge precise table movements while milling.
-24-
Cross (Y-Axis) Travel
(In & Out)
Y-Axis
Lock Lever
Graduated Dials
Longitudinal (X-Axis) Travel
Loosen X-axis lock lever shown in Figure 18. Turn
X-axis handwheels to adjust work table to desired
location. Tighten X-axis lock lever before turning
machine ON.
Cross (Y-Axis) Travel
To move the table along the Y-axis, loosen the
Y-axis table lock shown in Figure 18, then use the
handwheel in front of the table in the same man-
ner as the X-axis handwheel.
Model G0781 (Mfd. Since 2/15)