Positioning Table - Grizzly G7947 Owner's Manual

Positioning Table

The table can raised/lowered, rotated, and tilted
90° left or right. Table adjustment controls are
shown in Figure 34.
Support
Bracket
Lock Knob
Rotation
Lock Knob
Lock
Bolt
Location
Pin Nut
Figure 34. Table adjustment controls.
-32-
Table
Table
Height
Crank
Table Height
1.
Loosen the support bracket lock knob.
2.
Adjust the height.
3.
Lock the support bracket lock knob.
Table Rotation
1.
Loosen the table rotation lock knob.
2.
Rotate the table as necessary.
3.
Lock the table rotation lock knob.
Table Tilt
1. Tighten the location pin nut to draw the loca-
tion pin out of the hole.
Note: The location pin is friction fit in the hole
to lock the table at 0°. When re-installing, set
the table to 0°, back the nut off, and tap the
pin back in the hole.
2. Loosen the lock bolt and tilt the table to the
desired angle (make sure table rotation lock
knob is locked, so the table won't fall out).
3.
Tighten the lock bolt.
Model G7947/G7948 (Mfd. Since 01/21)