Assembly - Grizzly T33901 Owner's Manual

Assembly

The machine must be fully assembled before it
can be operated. Before beginning the assembly
process, refer to Needed for Setup and gather
all listed items. To ensure the assembly process
goes smoothly, first clean any parts that are cov-
ered or coated in heavy-duty rust preventative (if
applicable).
Straining or crushing injury
may occur from improperly
lifting machine or some of
its parts. To reduce this risk,
get help from other people
and use a forklift (or other
lifting equipment) rated for
weight of this machine.
To assemble machine:
T33901: Attach column assembly to base with
1.
(4) M10-1.5 x 25 hex bolts (see Figure 14).
Column
Assembly
Figure 14. T33901 column assembly attached to
base.
Model T33901/T33902 (Mfd. Since 07/23)
HEAVY LIFT!
x 4
Base
T33902: Attach column assembly to base with
(4) M10-1.5 x 30 hex bolts (see Figure 15).
Column
Assembly
Figure 15. T33902 column assembly attached to
base.
Mark top of rack, as shown in Figure 16, to
2.
keep track of which end is up.
Loosen set screw shown in Figure 16 to
3.
remove column collar.
Column
Collar
Rack
Figure 16. Example of marking top of rack.
x 4
Base
-19-