Protecting The Robotic Mower From Theft; Other Settings; Saving/Loading User Preferences; Changing The Date And Time Settings - Makita RM350D Instruction Manual

4. Select [Change wire signal].
The option menu appears.
5. Use the keypad and select a new channel code.
► Fig.55
NOTE: A mark is displayed next to the currently used channel code.
(The initial value is [Channel 1].) When changing the channel,
select a channel without the mark displayed.
6. Follow the message displayed on the screen and complete the
setting.
When the message [Dock the mower to the charging station.]
appears, select [Confi rm] and press the
When the message [Completed.] appears, press the

Protecting the Robotic Mower from theft

[Top menu] > [Main menu] > [Security] > [Anti-theft]
Prevent theft and improper use of the Robotic Mower by setting the
operation lock and notifi cation function.
1. Press the button on the control panel.
The [Main menu] appears.
2. Select displayed on the screen.
The PIN code entry screen appears.
3. Use the keypad and enter the PIN code.
The sub menu appears.
4. Select [Anti-theft].
The option menu appears.
5. Use the keypad and place a check mark in the checkbox of the
desired option.
You can select multiple options.
Option Details
Stopped: PIN When the Robotic Mower is forcibly stopped, PIN
code entry is necessary to restart operation.
Stopped: PIN & When the Robotic Mower is forcibly stopped, the
Alarm alarm sounds and PIN code entry is necessary to
restart operation.
Lifted: PIN & When the Robotic Mower is lifted up, the alarm
Alarm sounds and PIN code entry is necessary to restart
operation.
Tilted: PIN & When the Robotic Mower is tilted by a certain
Alarm angle or more, the alarm sounds and PIN code
entry is necessary to restart operation.
6. Select [Verify] and register the setting.
When the message [Saved successfully.] appears, press the

Other Settings

Saving/loading user preferences

[Top menu] > [Main menu] > [Others] > [Save and load
preferences]
You can save up to three preferred settings you create and customize
in the setting menus and load them at any time. This allows to use a
range of user preferences to switch according to the work area and
environment.
NOTE: A certain range of items (e.g., date and time, PIN code and
so on, set on the initial setting screen) cannot be saved and loaded.
1. Press the button on the control panel.
The [Main menu] appears.
2. Select displayed on the screen.
The sub menu appears.
3. Select [Save and load preferences].
► Fig.56
The menu selection screen appears.
key.
key.
key.
26
4. Select the desired menu.
Menu Details
Load Loads saved user preferences.
Save Saves the user preferences currently being used.
The option menu appears.
5. Select the user preference load source or the save destination
option name.
► Fig.57
NOTE: [Listed now] is displayed to the right of options with user
preferences already registered.
6. Follow the message displayed on the screen and complete the
setting.
When the message [Are you sure?] appears, select [Yes] and press
the key.

Changing the date and time settings

[Top menu] > [Main menu] > [Others] > [Date and time]
This is used to adjust or change the date and time set in the Robotic
Mower.
1. Press the button on the control panel.
The [Main menu] appears.
2. Select displayed on the screen.
The sub menu appears.
3. Select [Date and time].
The menu selection screen appears.
4. Use the / / /
Select and display the desired format on the screen.
Menu Option details
Date format: Selects the date format from [Year/Month/Day],
[Month/Day/Year], or [Day/Month/Year].
Time format: Switches the time format between [12 hours] or
[24 hours].
► Fig.58
5. Select [Next].
The date and time entry screen appears.
6. Use the keypad and enter the desired date and time.
► Fig.59
Entering the date and time
(1) Use the / / /
fi eld to be set.
(2) Use the keypad and enter the year, month, and day or the time.
(3) Repeat steps 1 and 2 and enter all the entry fi elds to be
changed.
7. Select [Verify].
When the message [Saved successfully.] appears, press the

Changing the display language

[Top menu] > [Main menu] > [Others] > [Language]
This is used to change the language displayed on the LCD screen.
1. Press the button on the control panel.
The [Main menu] appears.
2. Select displayed on the screen.
The sub menu appears.
3. Select [Language].
The language selection screen appears.
4. Select the desired language.
The display language of the language selection screen changes.
When the message [Saved successfully.] appears, press the
ENGLISH
keys to select the desired menu option.
keys to highlight the date or time entry
key.
key.