Makita UR013G Instruction Manual page 17

Cutter blade
CAUTION:
When handling a cutter blade,
always wear gloves and put the blade cover on
the blade.
CAUTION:
The cutter blade must be well pol-
ished, and free of cracks or breakage. If the cutter
blade hits a stone during operation, stop the tool and
check the cutter blade immediately.
CAUTION:
Always use the cutter blade
with the diameter described in the section for
specifications.
1. Put the blade cover on the cutter blade.
2-tooth blade
Fig.20
3-tooth blade
Fig.21
4-tooth blade
Fig.22
2. Insert the hex wrench through the hole in the gear
case to lock the spindle. Rotate the spindle until the hex
wrench is fully inserted.
6
Fig.23
► 1. Nut 2. Cup 3. Clamp washer 4. Cutter blade
5. Spindle 6. Receive washer 7. Hex wrench
3.
Mount the cutter blade onto the receive washer so
that the arrows on the cutter blade and guard are point-
ing in the same direction.
1
Fig.24
► 1. Arrow
17 ENGLISH
5
7
1
1
2
3
4