Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for HIKVISION AE-VC136T
Summary of Contents for HIKVISION AE-VC136T
- Page 1 Low Illumination Fisheye Vehicle-Mounted Camera User Manual UD28557B...
- Page 2 MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF...
-
Page 3: Regulatory Information
Regulatory Information FCC Information FCC compliance: This equipment has been tested and found to comply with the limits for a digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. -
Page 4: Symbol Conventions
Foreword These instructions are intended to ensure that user can use the product correctly to avoid danger or property loss. Before using, please read the manual carefully and keep it properly for further reference. Symbol Conventions The symbols that may be found in this document are defined as follows. -
Page 5: Package Check
1 Package Check 1.1 Before You Begin Before unboxing, check if the package is intact. Refer to the list to make sure that all the assembly parts are included. The packing list of the vehicle-mounted camera is shown below. 1.2 Packing List Table 1-1 Packing List Name Picture for Illustration... - Page 6 The appearance of the device varies according to different models, as shown in the following figures. Refers to the actual device for detailed information. Type A Camera Body Rubber Blanket Cable Figure 2-1 AE-VC136T(1.0mm) with Shield Type B Camera Rubber Blanket Cable Figure 2-2 AE-VC136T(1.0mm) Type C...
-
Page 7: Installation
2.2.2 Cables The product include 2 models, 2 kinds of cables are compared with different models. Make sure the cable is correct before you wiring. Aviation Plug Interface The camera is designed with an aviation plug, as shown below, to ensure shock-proof. - Page 8 Step 1 Choose a suitable mounting location to ensure the camera catches the driver properly. Pre-drill holes in the center of the mounting location. The hole diameter is determined according to the size of the wire harness, so that the wire harness can be passed through the car.