Advertisement
Quick Links
Advertisement
Related Manuals for HIKVISION AE-VC224T-IT
Summary of Contents for HIKVISION AE-VC224T-IT
- Page 1 Vehicle-Mounted Camera User Manual UD09114B-A...
- Page 2 Hikvision marks are the property of Hikvision and are registered trademarks or the subject of applications for the same by Hikvision and/or its affiliates. Other trademarks mentioned in this manual are the properties of their respective owners. No right of license is given to use such trademarks without express permission.
- Page 3 RegulatoryInformation FCCInformation FCCcompliance:Thisequipment has been tested and found to comply with the limits for a digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
-
Page 4: Safety Instruction
Safety Instruction These instructions are intended to ensure that user can use the product correctly to avoid danger or property loss. The precaution measure is divided into “Warnings” and “Cautions” Warnings:Seriousinjury or death may occur if any of the warnings are neglected. Cautions:Injuryor equipment damage may occur if any of the cautions are neglected. - Page 5 The sensor may be burned out by a laser beam, so ● when any laser equipment is in using, make sure that the surface of sensor will not be exposed to the laser beam. Do not place the camera in extremely hot, cold, dusty ●...
-
Page 6: Product Features
Introduction 1.1 Product Features This series of camera adopts new generation sensor with high sensitivity and advanced circuit design technology. It features high resolution, low image distortion and low noise, etc., which makes it suitable for surveillance system and image processing system. The main features are as follows: High performance CMOS sensor and high resolution ●... - Page 7 Please make sure that the device in the package is in ● good condition and all the assembly parts are included. Make sure that all the related equipment is power-off ● during the installation. Check the specification of the products for the ●...
- Page 8 Route camera’s cables through the cable hole of the bracket. Fixing Hole Seal Ring Route the Cable Secure the seal ring near the cable hole. Adjust the camera main body with UP upward as the figure below. Adjust Camera (Optional) If the installation site of the camera needs to be sealed, please wipe silica gel on the screw position and the cable hole, and seal them.