1. Manuals
  2. Brands
  3. HIKVISION Manuals
  4. Security Camera
  5. AP530HT
  6. Quick start manual

HIKVISION AP530HT Quick Start Manual

Hd-tvi ptz camera
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
HD-TVI PTZ Camera
AP530HT and
AP730HTIR730HTIR
Quick Start Guide

Advertisement

Table of Contents
loading

Related Manuals for HIKVISION AP530HT

Summary of Contents for HIKVISION AP530HT

  • Page 1 HD-TVI PTZ Camera AP530HT and AP730HTIR730HTIR Quick Start Guide...
  • Page 2 HD-TVI Speed Dome·Quick Start Guide Thank you for purchasing our product. If there are any questions, or requests, please do not hesitate to contact the dealer. This manual applies to HD-TVI Speed Domes. This manual may contain several technical incorrect places or printing errors, and the content is subject to change without notice.
  • Page 3 HD-TVI Speed Dome·Quick Start Guide Regulatory Information FCC Information FCC compliance: This equipment has been tested and found to comply with the limits for a digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
  • Page 4 HD-TVI Speed Dome·Quick Start Guide Safety Instruction These instructions are intended to ensure that user can use the product correctly to avoid danger or property loss. The precaution measure is divided into “Warnings” and “Cautions” Warnings: Serious injury or death may occur if any of the warnings are neglected. Cautions: Injury or equipment damage may occur if any of the cautions are neglected.
  • Page 5 HD-TVI Speed Dome·Quick Start Guide  Do not aim the speed dome at the sun or extra bright places. A blooming or smear may occur otherwise (which is not a malfunction however), and affecting the endurance of sensor at the same time.

  • Page 6: Table Of Contents

    HD-TVI Speed Dome·Quick Start Guide Table of Contents 1 Installation ......................1 1.1 Connecting the Cables ......................1 1.2 DIP Switch Settings ........................2 1.2.1 5-inch Speed Dome Settings ....................2 1.2.2 5-inch IR Speed Dome Settings ..................4 1.2.3 7-inch IR Speed Dome Settings ..................7 1.2.4 Mini Speed Dome Settings ....................

  • Page 7: Installation

    HD-TVI Speed Dome·Quick Start Guide 1 Installation Before you start: Check the package contents and make sure that the device in the package is in good condition and all the assembly parts are included. There are several ways to install the analog speed dome. The wall mounting is taken as an example below.

  • Page 8: Dip Switch Settings

    HD-TVI Speed Dome·Quick Start Guide ① AC24V ① AC24V CVBS Video Output YELLOW/GREEN GND BLACK AC24V HD-TVI Video Output RS485 ② ② YELLOW R485- Alarm ORANGE R485+ Figure 1-2 Cables of Other Speed Dome Table 1-2 Cables Description Name Description AC24V Power supply RS485+/-...
  • Page 9 HD-TVI Speed Dome·Quick Start Guide DIP Switch Figure 1-3 DIP Switch Settings for 5-inch Outdoor Speed Dome DIP Switch 1 2 3 4 5 6 7 Figure 1-4 DIP Switch Settings for 5-inch Indoor Speed Dome Figure 1-5 Enlarged View of DIP Switch Address Settings The SW1-switches from 1 to 8 are used for setting the address of speed dome.

  • Page 10: 5-Inch Ir Speed Dome Settings

    HD-TVI Speed Dome·Quick Start Guide Baudrate Settings The number 1 and 2 SW2-switches are used for setting the baudrate of the speed dome. The baudrate can be 2400bps, 4800bps, 9600bps and 19200bps. The baudrate will be set as 2400bps by default if it is out of this range.
  • Page 11 HD-TVI Speed Dome·Quick Start Guide  The default dome address is 0; the default baudrate is 2400; and the default value of the 120Ω terminator is OFF. Table 1-5 Switch Functions Switch Function 1 to 5 Set the address for the speed dome 6, 7 Set the baudrate for the speed dome 8, 9...
  • Page 12 HD-TVI Speed Dome·Quick Start Guide Switch Dome Address Baudrate List For convenient settings, refer to the following list to set the baudrate for the speed dome. The baudrate will be set as 2400bps by default if it is out of this range. Table 1-7 Baudrate Switch Baudrate...

  • Page 13: 7-Inch Ir Speed Dome Settings

    HD-TVI Speed Dome·Quick Start Guide Switch Baudrate 4800 9600 19200 Protocol List For convenient settings, refer to the following list to set the protocol for the speed dome. Table 1-8 Protocol Protocol Self-adaptive Pelco_D Pelco_P AD Manchester The speed dome is self-adaptive to private protocol when the No.8 and 9 switches are both OFF.
  • Page 14 HD-TVI Speed Dome·Quick Start Guide Figure 1-9 Enlarged View of DIP Switch The default dome address is 0; the default baudrate is 2400; and the default value of the 120Ω terminator is OFF. Address Settings The SW1 switch is used for setting the address of speed dome. You can refer to Table 1-9 for details of setting the speed dome address to a specific number.

  • Page 15: Mini Speed Dome Settings

    HD-TVI Speed Dome·Quick Start Guide Communication Mode Settings The No. 7 of SW2 switch is for setting the RS485 communication mode of the dome to simplex or half-duplex. Table 1-11 Set Communication Mode of the Dome DIP Switch SW2-Simplex/Half-duplex Settings Description Simplex Half-duplex...

  • Page 16: Wiring And Installation

    HD-TVI Speed Dome·Quick Start Guide  DIP Switch Location of Mini Analog Speed Dome DIP Switch Figure 1-11 DIP Switch of Mini Analog Speed Dome  Setting DIP Switch Figure 1-12 Enlarged View of DIP Switch The method of setting the DIP switch is the same with the one of 5-inch IR speed dome, please refer to the section 1.2.2 5-inch IR Speed Dome Settings for details.
  • Page 17 HD-TVI Speed Dome·Quick Start Guide Wall mounting is applicable to the indoor/outdoor solid wall construction. The followings are the mandatory precondition for wall mounting:  The wall must be thick enough to install the expansion screws.  Please make sure that the wall is strong enough to withstand more than 8 times the weight of the dome and the mount.

  • Page 18: Setting The Dip Switch

    HD-TVI Speed Dome·Quick Start Guide Follow the same instructions described above for the short-arm wall mounting. For outdoor applications, please adopt the water-proof measures. The short-arm wall mount is not recommended for outdoor applications. 1.3.3 Setting the DIP Switch Set the address and baudrate for the speed dome. The default value of DIP switch is shown below: ...

  • Page 19: In-Door Mounting Applications

    HD-TVI Speed Dome·Quick Start Guide 2 In-door Mounting Applications Before you start:  For cement wall, you need to use the expansion screw to fix the mount. The mounting hole of the expansion pipe on the wall should align with the mounting hole on the mount. ...
  • Page 20 HD-TVI Speed Dome·Quick Start Guide Figure 2-2 Draw and Cut Hole on the Ceiling 6. Connect the cables. Make sure the video cable and control wire have been connected to the corresponding interfaces. Connect the power cable and the red LED indicator turns on when the power is on. Please turn the power off after checking the speed dome.

  • Page 21: 5-Inch Speed Dome Ceiling Mounting Applications

    HD-TVI Speed Dome·Quick Start Guide (1) Attach the trim ring to the lower dome and align the triangular notch of the trim ring with the arrow label on the in-ceiling mount. (2) After having firmly placed the trim ring to the ceiling, rotate the trim ring in the direction of arrow to secure the trim ring in place.

  • Page 22: Wiring

    HD-TVI Speed Dome·Quick Start Guide Figure 2-6 Remove 4 screws 2. Remove the in-ceiling mounting bracket. Figure 2-7 Remove the in-ceiling mounting bracket 3. Screw 4 bolts onto the back box by a Phillips screwdriver. Figure 2-8 Install the bolts 2.2.2 Wiring The cables of dome can be routed either from the top or the side of the back box.
  • Page 23 HD-TVI Speed Dome·Quick Start Guide 1. Rotate the lower dome counterclockwise to separate it from the back box. Refer to the Figure 2-1. 2. Remove the protective lens cover, foam and sticker from the dome drive. Set the address and baudrate for the analog speed dome. Please refer to the Section 1.2.1 5-inch Speed Dome Settings for DIP switch settings.

  • Page 24: Mini Speed Dome In-Ceiling Mounting Applications

    HD-TVI Speed Dome·Quick Start Guide to the following figure. ② Push Forwards Spring Line up Lock Clip ① Push Upwards Figure 2-12 Attach the Back Box to the Mounting Base  Please remove the protective film on the lower dome after the installation is finished. ...
  • Page 25 HD-TVI Speed Dome·Quick Start Guide Ф129 Ф11 Figure 2-13 Drill Holes 2. Disassemble the speed dome. 1) Loosen three screws as shown in the following figure. 2) Remove the lower dome. 3) Loosen three screws and remove the back box. 4) Remove the protective lens cover, foam and sticker from the dome drive.

  • Page 26: Mini Ir Speed Dome In-Ceiling Mounting

    HD-TVI Speed Dome·Quick Start Guide 6. Rotate the bolts again. The toggle will automatically rotate down to secure the dome to the ceiling. Ceiling Toggle Figure 2-16 Install the Dome to the Ceiling 7. Secure the lower dome to the back box with three screws as shown in Figure 2-17. Screws Figure 2-17 Install the Lower Dome 8.
  • Page 27 HD-TVI Speed Dome·Quick Start Guide Figure 2-18 Drill Template 3. Route the cables through the ceiling for the speed dome. Please refer to the section 1.1 Connecting the Cables for connecting the cables. 4. Install the toggle bolts. 1) Remove the toggle from the toggle bolt. 2) Insert the bolts into the 3 screw holes on the dome.

  • Page 28: Mini Speed Dome Ceiling Mounting Applications

    HD-TVI Speed Dome·Quick Start Guide 7. Rotate the bolts again. The toggle will automatically rotate down to secure the dome to the ceiling. Figure 2-21 Install the Dome to the Ceiling 2.4 Mini Speed Dome Ceiling Mounting Applications Before you start: The ceiling mounting is applicable to the indoor/outdoor solid ceiling construction.
  • Page 29 HD-TVI Speed Dome·Quick Start Guide 2) Drill screw holes and a cable hole (optional) according to the drill template. Figure 2-23 Drill Template 2. Disassemble the speed dome. 1) Loosen three screws on the notch. 2) Remove the lower dome. 3) Remove the protective lens cover, foam and sticker from the dome drive as shown in Figure 2-24.
  • Page 30 HD-TVI Speed Dome·Quick Start Guide Align Unlock Label Figure 2-26 Install Speed Dome  For cement ceiling mounting, you need to use the expansion screw to fix the mount. The mounting hole of the expansion pipe on the wall should align with the mounting hole on the mount.

  • Page 31: Application And Operations

    HD-TVI Speed Dome·Quick Start Guide 3 Application and Operations 3.1 System Application The device can be controlled through the back-end device or control software. The back-end device includes control keyboard, DVR (Digital Video Recorder), etc., and the control software includes client software.

  • Page 32: Configuring Patrol

    HD-TVI Speed Dome·Quick Start Guide MAIN MENUS <SYSTEM INFO> <DOME SETTINGS> <RESTORE SETTINGS> <RESTORE CAMERA> <REBOOT DOME> <LANGUAGE> ENGLISH EXIT Figure 3-2 Main Menu Refer to the user manual for the detailed instruction to set the speed dome. 3.2.1 Configuring Patrol You can set the patrol function by the DVR and OSD menu, as well as the one-touch patrol can be realized.
  • Page 33 HD-TVI Speed Dome·Quick Start Guide Figure 3-4 Key point Configuration 4. Configure key point parameters, such as the key point No., duration of staying for one key point and speed of patrol. The key point is corresponding to the preset. The Key Point No. determines the order at which the PTZ will follow while cycling through the patrol.
  • Page 34 HD-TVI Speed Dome·Quick Start Guide Up to 8 patrols can be configured. 3. Edit the patrol. 1). Move the cursor to EDIT PATROL and click IRIS+ to enter edit mode. NUM PST DWELL SPEED IRIS+ OK IRIS- CANCEL Figure 3-6 Edit the Patrol 2).

  • Page 35: Configuring Park Actions

    HD-TVI Speed Dome·Quick Start Guide 3.2.2 Configuring Park Actions Purpose: For some certain model of the speed dome, it can be configured to start a predefined park action (scan, preset, patrol and etc.) automatically after a period of inactivity (park time). ...
  • Page 36 HD-TVI Speed Dome·Quick Start Guide MOTION AUTO FLIP PROPORTIONAL PAN PARK TIME PARK ACT NONE SCAN SPEED IMAGE FREEZE DOME SPEED BACK EXIT Figure 3-8 PTZ Configuration 2. Move the cursor to the PARK TIME, and set the value in the range from 5 to 720 seconds. 3.

  • Page 37: Troubleshooting

    HD-TVI Speed Dome·Quick Start Guide 4 Troubleshooting 4.1 Device Exceptions Question Why does the speed dome fail to start or repeatedly reboot? Why does the speed dome restart intermittently when controlling PTZ, calling presets or turning on the infrared lights of the IR dome at night? Answer ...
  • Page 38 HD-TVI Speed Dome·Quick Start Guide Answer  Please check whether the protective film of the bubble has been removed.  Please check whether there are foreign objects on the bubble or the lens.  Please check where there are obstructions such as spider web nearby. ...

This manual is also suitable for:

Ap730htir

Table of Contents