Labels - GE AKTA ready XL Operating Instructions Manual

2.2
Introduction
System nameplate
ÄKTA ready XL Operating Instructions 29281616 AE
TeDIS Valid on Date Printed

Labels

This section describes the various labels on ÄKTA ready XL and their meaning.
The system nameplate is located on the electrical cabinet.
The texts and symbols that can be found on the system nameplate are explained in
the table below.
Label text
Serial no.
Type
Year of manufacture
Power supply
Frequency
Factory ID
Short circuit current rat-
ing
Total FLA
Largest motor FLA
Protection class
Ambient temperature
Operating temperature
range
Max operating pressure
Pneumatic supply min-
max
Description
The system identifying number for the unique in-
stallation.
Product type.
The manufacturing year.
The voltage alternatives.
The supply voltage frequency.
Identification code of the manufacturing facility.
The maximum current the system can withstand.
The full load ampere.
The largest motor installed on the system.
The electrical appliances protection classification
according to international standard IEC 60529.
The allowed ambient temperature interval.
The allowed operating temperature interval.
The maximum allowed operating pressure.
The required pressure for pressurized air supply.
Printed on: 15-09-2023 11:27:35 ***
2 Safety instructions
2.2 Labels
21