Advertisement
34
Memory Error Message
If the memory check operation that the unit performs when the RESET
button is pressed detects a data error, the following message appears on
the screen instead of the startup screen.
"A problem with memory contents has been found, and memory
must be initialized. Press [Action] to continue with the reset
procedure. (Pressing [Action] may start the memory initialization
procedure.) Perform the full reset procedure (memory
initialization) in accordance with the procedure described in the
manual."
This message indicates that the memory error is fatal and so recovery is
impossible. Press [Action] to execute a full reset (memory initialize),
which deletes all data stored in memory.
¢ Pressing [Action] should display the Startup screen followed by the
touch screen alignment screen. Perform steps 4 through 6 under
"Set Up" on page 10 to set up the unit.
e If pressing [Action] returns to the desktop without displaying the
startup screen first, see the following explanation for the procedure
you need to follow.
What to do if the startup screen does not appear when you
press [Action]
Even though the desktop appears when you press [Action]. there is still
a data error in memory and you have to perform a full reset (memory
initialize). Before you do, however, there is the chance that some of the
data in memory can be recalled and even transferred to a computer. Try
recalling the data you need before performing the procedure described
on the next page to perform a full reset.
wa
i
Full Reset (Memory Initialize)
Performing a Full Reset
Important A\
1. Make sure that unit power is turned on.
3. Press [Action].
* This causes the following message to appear on the display screen.
4. Press [Action] again.
¢ This starts the full reset operation, which deletes all data in memory.
35
Advertisement
