Advertisement
20
Connecting the Cradle to a Computer
The cradle has a serial cable for connection to a personal computer.
Connect the end of the cable to a serial port of the computer to which
you want to connect.
Important A
© See "Required System Configuration" on page 21 of this Hardware
Manual for details on the type of computer system required for use
with the cradle.
Be sure to turn off the CASSIOPEIA and your computer before
connecting the cradle.
ee
UHH
HOLES
4 | | if
|
|
ot
(==
Asics,
a
\
The above illustration is one example of possible connection
configurations. The location and layout of serial connectors vary from
computer to computer. See the documentation that comes with your
computer for full details on connecting to its serial ports.
The cradle can be connected directly to a 9-pin type serial port, which
is the type used by most personal computers. You can also connect to
a 25-pin serial port using an adapter.
Note that after connecting the cradle to your computer, you also need
to make certain Windows CE Services settings on your computer to
enable data transfers. See the Microsoft User's Guide for details
about setting up and using Windows CE Services.
ey
the unit.
e¢ One CD-ROM drive
¢ Keyboard
¢ Modem for remote synchronization
21
Advertisement
