Appendix; Message List - Yamaha TransAcoustic TA3 Owner's Manual

Appendix

Message List

Message Description
The instrument is standing by for Bluetooth pairing (page 59). While this message is shown, you cannot operate
the instrument.
The instrument is being initialized (page 54). Do not turn the power off while this message is shown.
The instrument is connected to a smart device and the app "Smart Pianist" is being used (page 61). While this
message is shown, control the instrument by using Smart Pianist. To disconnect, close Smart Pianist on the smart
device.
The Character Code setting (page 37) is not appropriate for the file name of the Song which you are selecting.
Change the Character Code setting.
The data format is not compatible with this instrument, or the data has some other problems. This Song cannot be
selected.
The memory or the number of the files in the copy destination USB flash drive is full. Delete any unnecessary
Songs or files in the USB flash drive (page 35).
The Song you have selected cannot be copied or deleted on this instrument. Copy or delete these types of Songs
on a computer.
No USB flash drive can be found, or a problem has occurred in the USB flash drive. Disconnect and connect the
USB flash drive again, and then execute the operation again. If this message appears repeatedly even when there
aren't any other likely problems, the USB flash drive may be damaged.
Indicates that the USB flash drive is write-protected. Disable write-protect before using.
The memory of the USB flash drive has become full, or the number of files and folders exceeds the system limit.
Audio Song playback or recording has failed. If you are using a USB flash drive to which data has already been
stored or deleted a number of times, first make sure that the USB flash drive does not contain important data, and
then format it (page 56) to use it on this instrument.
A malfunction has occurred in the instrument. Contact your nearest Yamaha dealer or authorized distributor.
–
The operation has been completed.
The available memory of the instrument or the USB flash drive is at a low level. We recommend that you remove
any unnecessary User Songs (page 35) to ensure sufficient memory capacity before starting to record.
The operation could not be completed because the available memory of the instrument or the USB flash drive is
nearly empty. If this message is shown while recording, your performance data may not be correctly saved.
This is a confirmation prompt asking if you are sure you want to delete the User Song (page 35) or format the USB
flash drive (page 56). Press Button 3 [Func.] to execute. Pressing a button other than Button 3 [Func.] cancels the
operation.
The selected Song is a read-only file and cannot be deleted or overwritten.
An unformatted USB flash drive is connected. First make sure that the USB flash drive does not contain important
data, and then format it (page 56).
65
TA3 SH3 SC3 Owner's Manual