Table of Contents
Advertisement
Function
No.
Bluetooth Pairing
f'6
Auto Power Off
f(1
AUX IN Noise
f(2
Gate
Audio Loopback
f(3
Version
f(4
52
TA3 SH3 SC3 Owner's Manual
Description
Registers the Bluetooth-equipped device on this
instrument. While "F7.6" is shown in the display, press
Button 3 [Func.] to put pairing in standby on the
instrument. After that, make settings on the Bluetooth
equipped-device. For detailed instructions, refer to
page 59.
Enables or disables the Auto Power Off function
(page 16).
• On: The power is automatically turned off if the instrument is
not operated for approximately 30 minutes.
• OFF: The power will not be turned off automatically. Press
P
the [
] (Standby/On) switch to turn off the power.
NOTICE
When the instrument is communicating with other
devices or the Songs are played back, the power will not
be turned off automatically. Make sure to turn off the
power by pressing the [
P
] (Standby/On) switch when the
instrument is not in use.
The AUX IN Noise Gate function conveniently cuts
unwanted noise from the sound input via the [AUX IN]
jack. However, this may result in wanted sounds also
being cut, such as the soft decay sound of a piano. To
avoid this, set this function to OFF.
Determines whether audio input from the computer or
smart device (via the USB Audio Interface function,
page 63; or wireless LAN connection, page 62) is
output to a computer or a smart device or not, along
with the performance played on the instrument. To
output the audio input, set Audio Loopback to On. For
example, if you want to record the audio sound input as
well as the sound played on the instrument to a
computer or the smart device, set this to on. If you
intend to record only the sound played on the
instrument to a computer or smart device, set this to
off.
CAUTION
If you are using a DAW (digital audio workstation)
application with this instrument, set Audio Loopback to
OFF. Otherwise, a loud sound may occur, depending on
the settings of the computer or the application software.
NOTE
• The sound cannot be output to a device connected by
Bluetooth or the [AUX IN] jack.
• The playback sound of an Audio Song on this instrument is
also output to the external device when this is set to On,
while the sound is not output when this is set to OFF.
• With Audio recording on this instrument, the audio input
sound from the external device is recorded when this is set
to On, while the sound is not recorded when this is set to
OFF.
The firmware version of this unit is shown in the
display.
(Example) version 1.00
Setting
Default
range
setting
—
—
On/OFF
On
On/OFF
On
On/OFF
On
—
—
Advertisement
Table of Contents
