Table of Contents
Advertisement
4
Press Button 1 [Select] several times to select
the recording format (Song category).
• For MIDI recording to internal memory: U. (U.01–U.10)
• For MIDI recording to a USB flash drive: S. (S.00–S.99)
• For Audio recording to a USB flash drive: A. (A.00–A.99)
5
Rotate the [VALUE] control to select the Song
number for recording.
You can confirm whether the selected Song contains
already-recorded data by checking the display.
NOTICE
When the selected Song number contains data, keep in
mind that recording new data will overwrite the previously
recorded data.
If you want to play along with the metronome sound,
turn the metronome on here (page 38). The metronome sound is not recorded.
6
Press Button 2 [Rec] to put recording in
standby.
The [Rec] lamp lights in red, and the [
lamp flashes.
If you want to record Rhythm playback with your
performance, start the Rhythm in this step (page 41). To start playback at the timing when you play the keyboard,
turn on the Synchro Start function in Function F6.5 (page 51).
NOTICE
When an "EnP" or "FUL" message appears on the display, the memory capacity of the internal memory or the USB flash
drive is nearly full. We recommend that you first remove any unnecessary User Songs (page 35) to ensure sufficient
memory capacity. If "EnP" appears, you can start recording, but your performance data may not be correctly saved or
recording may stop automatically. If "FUL" appears, you cannot start recording.
NOTE
To cancel recording standby status, press Button 2 [Rec] again.
7
Play the keyboard to start recording.
If you want to record an empty section at the start of the Song, press Button 3 [
recording.
The [
/
R
K
position (measure number or elapsed time) is shown on
the display while recording.
NOTICE
If "FUL" appears on the display while or after recording, this
indicates the internal memory or USB flash drive capacity
has become full and all or the part of the data will not be
saved. We recommend that you first delete any
unnecessary User Songs (page 35) to ensure sufficient
memory capacity.
30
TA3 SH3 SC3 Owner's Manual
] (Play/Pause) lamp lights, and the current
When a Song
contains data:
/
] (Play/Pause)
R
K
Measure number
When a Song does not
contain data:
Three dots light up.
/
] (Play/Pause) to start
R
K
Audio Song
MIDI Song
Elapsed time
Minutes
(In case of 10 minutes or more,
only the lowest digit is shown).
Only the left-most dot
lights up.
Seconds
Advertisement
Table of Contents
