Selecting A Voice For Playing With Digital Sound - Yamaha TransAcoustic TA3 Owner's Manual

Selecting a Voice for playing with digital sound

TA3 SH3 SC3
When in the Quiet mode, TransAcoustic mode, or Layer mode, you can play various preset Voices on the piano. For
information on available Voices, refer to the "Voice List" on page 23.
1
Press the Menu button several times until the
[VOICE] lamp lights up in orange.
The currently selected Voice number is shown on the
display.
2
Use the [VALUE] control or one of the Buttons 1 – 3 to select the desired Voice.
The selected Voice can be confirmed by the lamp and the display.
 [VALUE] control
Rotating the control step by step switches the Voice to the next or
previous one in the order of the Voice List. Pressing this control
instantly selects the CFX Grand (PF1) Voice.
 Button 1 [CFX]
Pressing this button selects the CFX Grand (PF1) Voice.
 Button 2 [Bösendorfer]
Pressing this button selects the Bösendorfer (PF2) Voice.
 Button 3 [Others]
Pressing this button selects the first Voice in each category in order.
While the power is on, the Voice last selected by Button 3 [Others] is retained. Pressing Button 3 [Others] allows
you to call up the last selected Voice instantly. When the power is turned off, the Voice for Button 3 resets to "PF3."
NOTE
Listen to the Demo Songs for each Voice to hear and experience the characteristics of the Voices (page 24).
Setting the Voice to "---" (Muting the digital sound)
Pressing the [VOLUME] control sets the Voice to "---, " allowing you to play the
keyboard without producing any digital sound. However, other functions can be
used. This setting can be used in situations such as playing an acoustic piano
sound while using the Rhythm function (page 41) or recording function (page 29).
You can also select "---" by rotating the [VALUE] control.
NOTE
For grand pianos without the silencing lever, "---" can be selected only when the [Aco.] lamp is lit.
By default, the CFX Grand Voice (PF1) is selected when the power is turned on. When the Voice Backup function is set to
on in Function F7.3 (page 51), the last selected Voice before the power was turned off will be called up when you turn the
power on next time.
22
TA3 SH3 SC3 Owner's Manual
Lights up in orange
The lamp of the selected button
Current Voice
number PF1
lights up in orange.
Press one of these buttons.