Function List - Yamaha TransAcoustic TA3 Owner's Manual

Table of Contents

Advertisement

Function List

The Functions are categorized as follows.
• Reverb settings: F1.1–F1.3 (see below)
• Voice effect settings: F2.1–F2.9 (page 46)
• Performance settings: F3.1–F3.6 (page 47)
• Sound settings: F4.1–F4.9 (page 49)
• Song settings: F5.1–F5.6 (page 50)
• Metronome/Rhythm settings: F6.1–F6.5 (page 50)
• Overall settings: F7.1–F8.5 (page 51)
 Reverb settings
Function
No.
Reverb On/Off
f!1
Reverb Depth
f!2
Reverb Type
f!3
Description
This function adds reverberation to the sound, including
the keyboard performance and Song playback. Turning
this function on and simulating the reverberation in a
concert hall, etc. gives you the feeling of the being at a
live performance.
NOTE
(TA3 only) When the [TA] lamp is lit (i.e. while in the TransAcoustic
mode or Layer mode), the Reverb is automatically turned off. If the
[TA] lamp is lit, the Reverb on/off setting (F1.1) will not be backed up
even when the Backup of Voice settings (F7.3) is set to on.
Adjusts the Reverb depth. This cannot be set when the
Reverb (F1.1) above is set to OFF and dashes are shown
in the display.
Selects a Reverb type. This cannot be set when the
Reverb (F1.1) above is set to OFF and dashes are shown
in the display.
NOTE
When an external Song (page 24) is played back, or when the MIDI
data is received (from a computer or MIDI device; pages 63, 64),
dashes may appear on the display. This indicates that the data uses
a Reverb type which is not available on this instrument.
Off
No effect is applied.
Recital
Simulates clear reverberation in a
mid-sized hall suitable for piano
Hall
recital.
Concert
Simulates brilliant reverberation in a
large hall for public orchestra
Hall
performances.
Chamber
Simulates the elegant reverberation
in a small room suitable for chamber
music.
Cathedral
Simulates the solemn reverberation
in a high-ceiling stone-made
cathedral.
Club
Simulates the lively reverberation in a
jazz club or a small bar.
Plate
Simulates the bright sound of vintage
reverb equipment used in recording
studios.
Setting
Default
range
setting
On/OFF
On
1–20
Differs
depending
on the Voice
(See the
Differs
column at
depending
left)
on the Voice
TA3 SH3 SC3 Owner's Manual
4
45

Advertisement

Table of Contents
loading

Table of Contents