Table of Contents
Advertisement
1
(Only when playing a Song from a USB flash drive)
Connect the USB flash drive to the [USB TO DEVICE] terminal.
Before using the USB flash drive, be sure to read "Connecting USB devices" on page 55.
2
Press the Menu button several times until the
[SONG] lamp lights up in orange.
3
Press Button 1 [Select] several times to select
the Song category (page 24).
4
Rotate the [VALUE] control to select the
desired Song.
When one of the following displays is called up, all Songs
in the category play back in turn continuously until you
stop playback. When you call up any other Song numbers, only the selected Song plays back.
• *.rd (Random Playback): Continuously plays back all Songs in the selected category in random order.
• *.AL (All-repeat Playback): Continuously plays back all Songs in the selected category in number order.
The asterisk (*) indicates one of the Song categories. For example, selecting "P.rd" plays all preset Songs in random order.
NOTE
• Pressing the [VALUE] control selects the first Song in the selected Song category.
• Continuous playback is not available for Voice Demo Songs.
5
Press Button 3 [
/
R
/
The [
] (Play/Pause) lamp lights up and the current position (measure number or elapsed time) appears in the
R
K
display. The dot at the lower right of the display flashes at the MIDI Song tempo (or the metronome tempo when
playing back an Audio Song). For information on playback-related operations, see page 27.
MIDI Song
NOTE
The current position is not displayed when playing back Voice Demo Songs.
Usually, the Song stops automatically when playback of the selected Song reaches the end. To stop manually during
playback, press Button 1 [Select].
] (Play/Pause) to start playback.
K
Current
measure number
Lights up in orange
Audio Song
Elapsed time
Seconds
Minutes
(In case of 10 minutes or more,
only the lowest digit is shown).
TA3 SH3 SC3 Owner's Manual
3
25
Advertisement
Table of Contents
