Yamaha TransAcoustic TA3 Owner's Manual page 15

1
• For grand pianos:
TA3 SH3 SC3
Connect the plugs to the DC IN jack (DC IN 24V) located at bottom the piano, and to the AC outlet in the order
shown in the illustration. If you desire a cleaner installation, you can attach the AC adaptor to the adaptor holder
which is located at behind the control unit.
DC IN 24V
Adaptor holder
Adaptor holder
Hold by hook-and-loop fasteners
• For grand pianos:
TA3 SH3 SC3
Connect the plugs of the AC adaptor to the [DC IN 16V] jack on the control unit in the order shown in the
illustration. If you desire a cleaner installation, you can attach the AC adaptor to the adaptor holder (see the
illustration above), and also use the hooks to hold excess cord. The adaptor holder and the hooks are located
behind the control unit.
Adaptor holder
2
Press the [ ] (Standby/On) switch on the control unit to
P
turn the power on.
The power lamp and the display light. To turn the power off, press the
switch again.
NOTICE
Press only the [ P ] (Standby/On) switch when turning the power on. Any other operations, such as pressing the keys,
buttons or pedals may cause the instrument to malfunction.
CAUTION
Even when the power is turned off, electricity is still flowing to the instrument at the minimum level. Remove the electric plug
from the outlet when the instrument is not to be used for extended periods of time, or during electrical storms.
AC outlet
1-3
AC plug
Control unit
AC adaptor
AC outlet
1-3
AC plug
Control unit
The shape of the plug and outlet may differ depending on your locale.
DC IN 24V
Rear side
Power cord
AC
adaptor
1-1
The shape of the plug and outlet may
differ depending on your locale.
Hook
Power cord
AC
adaptor
1-1
TA3 SH3 SC3 Owner's Manual
1
1-2
1-2
15