Table of Contents
Advertisement
Operating status
Schedule
Configurable I/O
Device
Network status
Service
Managing Setpoints
To configure setpoint settings
1. Swipe left from the Home screen.
Managing Setpoints
Figure 84 System status
Table 28: System status
Equipment type, Current operating mode, Heat status, Cool status, Aux heat,
Fan status, Indoor temperature, Indoor setpoint, Indoor humidity, Indoor
CO2, Discharge air temperature, Discharge air control setpoint, Pipe
temperature, Recovery status, Override remaining, Run time, Restart reason,
Terminal load, UTC offset
Current schedule time, Current occupancy state, Current schedule state,
Next schedule state, Time to next schedule state,
All terminals ON/OFF status.
Model name, Boot loader version, Firmware version, Application version,
UUID, Serial No.
For BACnet MS/TP: Device ID, MAC address, Baud rate. For Modbus:
Address, Baud rate, Parity, Stopbits
Service personnel name and phone number.
MANAGING SETPOINTS
93
Advertisement
Table of Contents
