Table of Contents
Advertisement
4 - CONFIGURATION
3. Tap Temporary Override to set the temporary overrides when the user override the
setpoint. The temporary override is default.
The Temporary override screen appears.
4. Set the time limit that temporary override should last. After this time, setpoint return to
the scheduled mode.
5. To make the override permanent, set the override settings as Permanent override.
To modify service info
Service info contains the maintenance/installer/contractor personnel who provides
the periodic maintenance service. To add/modify the details, follow the procedure
given below.
1. Swipe left from the Home screen.
2. On the Quick access screen, tap
The Service info screen appears.
48
Figure 24 Override setting
Figure 25 Temporary override
> Basic > scroll down > Service Info.
Basic configuration
Advertisement
Table of Contents
