Additional References For Troubleshooting Software Configuration; Feature History For Troubleshooting Software Configuration - Cisco Catalyst 9500 Manual

Troubleshooting the Software Configuration
Character
P
Q
U
To end a trace in progress, enter the escape sequence (Ctrl-^ X by default). Simultaneously press and release
the Ctrl, Shift, and 6 keys and then press the X key.
Additional References for Troubleshooting Software
Configuration
Related Documents
Related Topic
For complete syntax and usage information for the commands used in
this chapter.

Feature History for Troubleshooting Software Configuration

This table provides release and related information for features explained in this module.
These features are available on all releases subsequent to the one they were introduced in, unless noted
otherwise.
Release
Cisco IOS XE Everest 16.5.1a
Cisco IOS XE Fuji 16.8.1a
Use Cisco Feature Navigator to find information about platform and software image support. To access Cisco
Feature Navigator, go to http://www.cisco.com/go/cfn.
Description
Protocol unreachable.
Source quench.
Port unreachable.
Feature
Troubleshooting
Software Configuration
Troubleshooting
Software Configuration
System Management Configuration Guide, Cisco IOS XE Amsterdam 17.2.x (Catalyst 9500 Switches)

Additional References for Troubleshooting Software Configuration

Document Title
Command Reference (Catalyst
9500 Series Switches)
Feature Information
Troubleshooting software configuration describes
how to identify and resolve software problems
related to the Cisco IOS software on the switch.
Support for this feature was introduced only on the
C9500-12Q, C9500-16X, C9500-24Q, C9500-40X
models of the Cisco Catalyst 9500 Series Switches.
Support for this feature was introduced only on the
C9500-32C, C9500-32QC, C9500-48Y4C, and
C9500-24Y4C models of the Cisco Catalyst 9500
Series Switches.
343