Installing The Handle - Makita LM004G Instruction Manual

2. Place your hands in the middle of the battery
cover and push it.
Fig.2
3.
Make sure that the battery cover is attached
securely, and the battery cover is locked securely with
the locking lever.
Fig.3
► 1 . Locking lever
1
9 ENGLISH

Installing the handle

CAUTION:
Install the handles securely.
NOTICE:
When installing handles, position the
cord so that it is not caught by anything between
the handles. If the cord is damaged, the mower
switch may not work.
1. Place the both ends of lower handle into the
grooves of the mower body, then tighten the clamping
levers, and then fold the clamping levers.
2
1
Fig.4
► 1 . Clamping lever 2. Lower handle
When tightening the clamping levers, tighten them until
the rings on the levers just cannot be seen.
Fig.5
► 1 . Ring
1