Table of Contents
Advertisement
Figure 35. Removing the cooling fan assembly
Next steps
Replace the cooling fan
assembly.
Installing the cooling fan cage
Prerequisites
1. Follow the safety guidelines listed in
CAUTION:
Ensure that the cables inside the system are correctly installed and retained by the cable
retention bracket before installing the cooling fan cage. Incorrectly installed cables may get damaged.
2. Follow the procedure listed in
3. If installed,
Remove the air
Steps
1. Holding the blue release lever of the cooling fan cage, align the guide rails with the guides on the system.
2. Lower the cooling fan cage assembly into the system until seated firmly.
3. Lower the blue release lever and press to lock the cooling fan cage assembly into the system.
Safety
instructions.
Before working inside your system
shroud.
.
Installing and removing system components
91
Advertisement
Table of Contents
