Installing The Cooling Fan Cage Assembly - Dell PowerEdge R760 Installation And Service Manual

Figure 48. Removing the cooling fan cage assembly
Next steps
1. Replace the cooling fan cage

Installing the cooling fan cage assembly

Prerequisites
1. Follow the safety guidelines listed in the
CAUTION: Ensure that the cables inside the system are correctly installed and retained by the cable
retention bracket before installing the cooling fan cage assembly. Incorrectly installed cables may get
damaged.
2. Follow the procedure listed in
3. If installed, remove the air shroud
Steps
1. Holding the blue release lever of the cooling fan cage, align the guide rails with the guides on the system.
2. Lower the cooling fan cage assembly into the system until seated firmly.
3. Lower the blue release lever and press to lock the cooling fan cage assembly into the system.
assembly.
Safety instructions.
Before working inside your
or remove the GPU air
system.
shroud.
Installing and removing system components 99