Air Shroud; Removing The Air Shroud; Installing The Air Shroud - Dell PowerEdge T560 Installation And Service Manual

Air shroud

Removing the air shroud

Prerequisites
CAUTION: Never operate your system with the air shroud removed. The system may get overheated quickly,
resulting in shutdown of the system and loss of data.
1. Follow the safety guidelines listed in
2. Follow the procedure listed in
Steps
Hold the edges of the air shroud, and lift the air shroud out of the system.
Figure 30. Removing the air shroud
Next steps
Replace the air shroud.

Installing the air shroud

Prerequisites
1. Follow the safety guidelines listed in
2. Follow the procedure listed in
3. If applicable, route the cables inside the system along the chassis wall and secure the cables by using the cable-securing
bracket.
Steps
1. Align the tabs on the air shroud with the guide pins on the system.
Safety instructions.
Before working inside your
Safety instructions.
Before working inside your
system.
system.
Installing and removing system components 87