Table of Contents
Advertisement
Installing and removing system components
Topics:
•
Safety instructions
•
Before working inside your system
•
After working inside your system
•
Recommended tools
•
Optional front bezel
•
System feet
•
Optional caster wheels
•
System cover
•
Air shroud
•
Cooling fans
•
Cable routing
•
Front PERC module
•
Drives
•
Drive backplane
•
Drive bays
•
Optional optical drive
•
Optional tape backup unit
•
Front IO module
•
System memory
•
Optional BOSS-N1 module
•
Optional internal USB card
•
Expansion cards and expansion card risers
•
Optional GPU card
•
GPU riser
•
Processor and heat sink
•
Optional OCP card
•
Optional serial COM port
•
System battery
•
Intrusion switch
•
Power supply unit
•
Power interposer board
•
System board
•
Trusted Platform Module
Safety instructions
NOTE:
Whenever you need to lift the system, get others to assist you. To avoid injury, do not attempt to lift the system by
yourself.
CAUTION:
Ensure that two or more people lift the system horizontally from the box and place it on a flat
surface, rack lift, or into the rails.
WARNING:
Opening or removing the system cover while the system is powered on may expose you to a risk of
electric shock.
WARNING:
Do not operate the system without the cover for a duration exceeding five minutes. Operating the
system without the system cover can result in component damage.
Installing and removing system components
7
77
Advertisement
Table of Contents
