Table of Contents
Advertisement
The AP Mode section of the screen expands.
Select the check box for the IP address setting that you want to use:
4.
Get an IP address dynamically from the other router. The other router on the
•
network assigns an IP address to this router while this router is in AP mode.
Fixed IP address (not recommended). Use this setting if you want to manually
•
assign a specific IP address to this router while it is in AP mode. Using this option
effectively requires advanced network experience.
Note:
To avoid interference with other routers or gateways in your network,
NETGEAR recommends that you use different wireless settings on each
router. You could also turn off the wireless radio on the other router or gateway
and use your router only for wireless client access.
Click the Apply button.
5.
The IP address of the router changes, and you are disconnected. To reconnect, close and
restart your web browser, and type http://www.routerlogin.net.
R7000 Smart WiFi Router
Advanced Settings
95
Advertisement
Table of Contents
