Toshiba VFNC3-2001P Instruction Manual page 20

efesotomasyon.com -Toshiba inverter,drive,servo,plc
1.3.3
In case of the lug connector, cover the lug connector with insulated tube, or use the insulated lug connector.
Note 1: EMC plate is supplied as standard.
1) Power circuit terminal board
1
* Bend the clips on the wiring port of the terminal cover to connect the PO, PA/+, and PC/- terminals.
Power circuit and control circuit terminal boards
In case of the lug connector, cover the lug connector with insulated tube, or use the insulated lug
connector.
Screw size Tightening torque
M3.5 screw 1.0Nm
M4 screw 1.4Nm
M5 screw 3.0Nm
For details on terminal functions, see 2.3.1.
VFNC3-2001 ∼ 2007P
M3.5 screw
Short-circuit cover
Earth terminal
(M4 screw)
8.9lb in
12.4lb in
26.6lb in
R/L1 S/L2 T/L3
P0 PA/+ PC/- U/T1 V/T2 W/T3
Earth
Earth terminal
terminal
(M4 screw)
(M5 screw)
EMC plate
For installation (Note 1)
A-8
Earth terminal
M3.5 screw
E6581595