Advertisement
R
epair
[3] DISASSEMBLY/ASSEMBLY
[3]-3. Spiral bevel gear 37 and Ball bearing 6201DDW (cont.)
ASSEMBLING
Ball bearing 6201DDW and Spiral bevel gear can be assembled as described in Fig. 9.
Fig. 9
1. Mount Flat washer 12
on Spindle.
Flat washer 12
Spindle
4. Install Retaining ring R-32 with 1R005 to secure Ball
bearing 6201DDW.
Then, apply a little amount of Grease/ Lubricant* to
the drum portion of Spindle.
1R005
Retaining ring R-32
Bearing box
6. Install Retaining ring S-12 with 1R291.
2. Set Spindle on 1R217, then set new
Ball bearing 6201DDW and 1R028
as drawn below. Then press-fit the
ball bearing on Spindle.
Note: Do not reuse the removed Ball
bearing 6201DDW.
*Important:
Grease/ Lubricant is necessary for
smooth press-fitting of Spiral bevel
gear 37 onto Spindle without tilting
in the next step 5.
3. Set Bearing box on 1R217,
then set 1R028 on Spindle
as drawn below.
Then press-fit Spindle into
Bearing box by pressing 1R028
with arbor press.
1R028
Ball bearing
6201DDW
Spindle
1R217
5. Set Bearing box on 1R217, then set 1R028 on
Spiral bevel gear 37 as drawn below.
And then, press-fit the Gear on Spindle of
Bearing box while keeping Spiral bevel gear 37
in parallel with 1R217.
P 6/ 10
1R028
Spindle
Bearing box
1R028
Spiral bevel
gear 37
Bearing box
1R217
Advertisement
