Uncertainty (K) : 1.5 m/s can only be operated on single-phase AC supply. They Model M9001 are double-insulated and can, therefore, also be used from sockets without earth wire. Work mode : surface grinding Vibration emission (a ) : 5.0 m/s...
Page 3
EC Declaration of Conformity Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any Makita declares that the following Machine(s): adapter plugs with earthed (grounded) power Designation of Machine: tools. Unmodified plugs and matching outlets will Angle Grinder reduce risk of electric shock.
Personal safety 22. Maintain power tools. Check for misalignment Stay alert, watch what you are doing and use or binding of moving parts, breakage of parts common sense when operating a power tool. Do and any other condition that may affect the not use a power tool while you are tired or under power tool’s operation.
Page 5
Threaded mounting of accessories must 13. Do not run the power tool while carrying it at match grinder spindle thread. your side. Accidental contact with the spinning accessories mounted by flanges, the arbour accessory could snag your clothing, pulling the hole of the accessory must fit the locating accessory into your body.
Page 6
Safety Warnings Specific for Grinding and Abrasive d) Do not restart the cutting operation in the Cutting-Off Operations: workpiece. Let the wheel reach full speed and a) Use only wheel types that are recommended carefully re-enter the cut. The wheel may bind, for your power tool and the specific guard walk up or kickback if the power tool is restarted in designed for the selected wheel.
31. If working place is extremely hot and humid, FUNCTIONAL DESCRIPTION or badly polluted by conductive dust, use a short-circuit breaker (30 mA) to assure operator safety. CAUTION: 32. Do not use the tool on any materials Always be sure that the tool is switched off and •...
Page 8
For tool with the lock on and lock-off switch 1. Wheel guard To prevent the switch trigger from accidentally pulled, a 2. Screw lock lever is provided. 3. Bearing box To start the tool, push in the lock lever (in the A direction) and then pull the switch trigger (in the B direction).
Do not "jam" the wheel or apply excessive • OPERATION pressure. Do not attempt to make an excessive depth of cut. Overstressing the wheel increases the loading and susceptibility to twisting or binding WARNING: of the wheel in the cut and the possibility of It should never be necessary to force the tool.
To maintain product SAFETY and RELIABILITY, repairs, MAINTENANCE any other maintenance or adjustment should be performed by Makita Authorized Service Centers, always using Makita replacement parts. CAUTION: Always be sure that the tool is switched off and • unplugged before attempting to perform inspection or maintenance.