Makita M0910B Repair Manual page 5

R
epair
[3] DISASSEMBLY/ASSEMBLY
[3]-3. Spiral bevel gear 37 and Ball bearing 6201DDW (cont.)
DISASSEMBLING
(2) Disassemble Spindle as drawn in Fig. 7.
Fig. 7
1. Put Bearing box on 1R217,
then put 1R026 over the
stepped portion of Spindle.
1R026
Spindle
Spiral bevel
gear 37
Bearing box
1R217
(3) Disassemble Ball bearing 6201DDW from Bearing box. (Fig. 8)
Fig. 8
4. Remove Retaining ring R-32 with 1R005.
Retaining ring R-32
2. Push Spindle out a little by tapping 1R026
carefully using arbor press with a down stroke
of approx.10mm long. Then remove 1R026.
approx.
10 mm
Note:
Do not reuse removed Ball bearing 6201DDW
because it is damaged in this step.
5. Remove Ball bearing 6201DDW from Bearing box.
1R005
In this step, Flat washer 12 is removed.
Flat washer 12
Ball bearing 6201DDW
P 5/ 10
3. Put 1R281 on Spindle.
Then, press 1R281 to
remove Spindle from
Spiral bevel gear 37.
1R281
Spindle