Mounting Bracket Installation - Honeywell GLEN ALDEN Manual

1. Turn off the circuit breakers and the wall switch to
the fan supply line lead (Fig. 1).
!
DANGER: Failure to disconnect the power
supply prior to installation may result in serious
injury or death.
2. Ensure that the blades will be at least 30 in. (76 cm)
from any obstruction and at least 7 ft. (2,13 m) above
the floor (Fig. 2).
3. Secure the upper mounting bracket to the outlet
box using screws provided with the outlet box
(not included) and the two flat washers from the
hardware bag (Fig. 3).
Note: It is very important that you use the proper
hardware when installing the mounting bracket as
this will support the fan.
Flat Washer

MOUNTING BRACKET INSTALLATION

Fig. 1
Fig. 2
Fig. 3
5
30" Min
7' Min
Outlet Box
Upper Mounting
Bracket