Final Installation - Honeywell GLEN ALDEN Manual

14. Remove the three screws and washers from the
upper switch housing. Connect plug from the motor
to the plug from the switch housing cap. Align holes
in the switch housing cap with holes in upper switch
housing. Re-install screws and washers that were
previously removed. Use a Phillips screwdriver (not
included) to secure all screws (Fig. 15).
Screw Washer
15. The pull chain extension or custom pull chain
extension (sold separately) may be attached to fan
pull chains (Fig. 15).
Fan Pull Chain

FINAL INSTALLATION

10
Fig. 14
Switch
Housing
Cap
Fig. 15
Fan
Pull Chain
Screw
and
Washer