Blade Installation - Honeywell GLEN ALDEN Manual

12. The blades attach to blade arms using the Fast
TM
Attach system.
Align each twist lock connector in the direction of
its corresponding hole in the blade. Place the blade
over the twist lock connectors. Rotate each twist
lock connector so that it is perpendicular to the
hole in the blade. Repeat for the remaining blades
(Fig. 12).
Note: A cutout in the upper switch housing allows
easy access to the motor screw holes.
13. Insert the two previously removed motor screws
through one blade arm and blade isolator and then
into the motor. Tighten motor screws securely.
Repeat with remaining blade arms, making sure
to completely secure each blade arm before
proceeding (Fig. 13).
Motor Screw

BLADE INSTALLATION

9 9
Fig. 12
Blade Arm
Twist Lock
Connector Blade
Fig. 13
Cutout
Blade
Isolator
Motor Screw
Blade
Blade Arm