Makita DCL282F Instruction Manual page 8

NOTE: When the dust bag or the paper filter is not
installed in the cleaner, the front cover does not close
completely.
Fig.6
Installing dust bag
Use the dust stopper when installing dust bag. Be
careful not to take the upper side for the lower side by
mistake because they are different each other.
Fig.7
► 1. Upper side of dust stopper 2. Lower side of dust
stopper
1. Insert the protrusion of the dust bag into the lower
groove on the dust stopper as shown in the figure.
1
2
Fig.8
► 1. Dust stopper 2. Lower groove 3. Dust bag
1
2
3
2. There is no distinction between the upper and
lower sides of the dust bag. You may insert its protru-
sion of either side into the lower groove of the dust
stopper.
Fig.9
► 1. Lower groove
3. Overlap the frame of dust stopper with that of the
dust bag.
Fig.10
4. Place the dust stopper and the dust bag together
into the cleaner cavity in the same direction of arrow on
the dust stopper. Insert them all the way into the slots in
the cleaner cavity.
Fig.11
8 ENGLISH
1