Makita DCL282F Instruction Manual page 12

Cleaning without nozzle
You can pick up powder and dust without nozzle.
Fig.29
For picking up dust on a floor in a standing position, it is
convenient to attach the extension wand to the cleaner.
Fig.30
► 1. Extension wand
Disposing of dust
CAUTION:
Empty the cleaner before it
becomes too full, or the suction force weakens.
CAUTION:
When closing the front cover, be
careful not to pinch your fingers.
NOTICE:
Never throw away the dust stopper
because it should be used whenever either the
dust bag or the paper filter is used.
NOTICE:
When the dust bag/paper filter is not
inside of the cleaner, the front cover does not
close completely. Do not force to close the front
cover. It may result in deforming or breakage of
the tool.
NOTICE:
When disposing of dust, also clean the
room for the dust bag/paper filter. The remaining
dust and dirt in the room may cause the sponge filter
to be clogged or the motor to be damaged.
1
1. Push the button to open the front cover. Opening
it until a click is heard allows a positive stop at that
position.
2
Fig.31
► 1. Front cover 2. Button
2. Pull out both the orange-colored dust stopper and
dust bag/paper filter together at the same time.
1
Fig.32
► 1. Dust stopper
3. Perform the procedures below depending on the
dust container type:
When using the dust bag
Remove the dust stopper and empty the dust bag.
1
Fig.33
► 1. Dust stopper 2. Dust bag
12 ENGLISH
1
2