Samsung MULTIXPRESS CLX-9251 Series Service Manual page 264

A3 color copier
Hide thumbs Also See for MULTIXPRESS CLX-9251 Series:
Table of Contents

Advertisement

4. Troubleshooting
► Error Code
A1–5212
A1–5213
► Error message
Motor Failure: #A1-5212. Turn off then on. Call for service if the problem persists
Motor Failure: #A1-5213. Turn off then on. Call for service if the problem persists
► Symptom
Yellow toner is not supplied normally.
► Troubleshooting method
A1–5212 : Toner supply is stopped during operation.
A1–5213 : Toner is not supplied.
1) Open the front cover. If the yellow toner pipe is blocked, open it.
2) Turn the machine off then on. If the error persists, check the following steps.
3) Enter SVC mode. Select the yellow toner supply motor test.
(Diagnostics > Engine Diagnostics > Engine Test Routines)
111-0000 : Toner Dispense Motor Yellow
4) If the motor is not operational, measure the yellow motor power with DVM.
a) If 24V power is generated, replace the yellow toner supply motor(JC93-00446A).
b) If 24V power is not generated,
Measure the 24V power on the SMPS board. If the SMPS
(110V)) is defective, replace it.
If the SMPS board is normal, replace the main board(JC92–02429A).
4-79
board(JC44-00100A (220V) / JC44-00093A
Copyright© 1995-2016 SAMSUNG. All rights reserved.

Advertisement

Table of Contents
loading

Table of Contents