Menu Navigation; Data Entry; Table 12 - Three-Button Data Entry - Honeywell SMV800 SmartLine User Manual

9.2.1 Menu Navigation

The user must press
PV display screen, select <EXIT>.
When on a lower-level menu, return to the menu above by selecting <Return>. Alternately, the
(up) and (down) buttons can be pressed simultaneously to return to the menu above. When on the
highest-level menu, pressing the (up) and (down) buttons simultaneously will exit the menu and
return to the PV display.
Use the  and  buttons to scroll through the list of menu items. Press the
item for data entry or activation. When an item is selected for data entry or activation, the cursor
will call up a pop-up window to allow editing of the value. No action is taken against a menu item

until the button is pressed.
If a user presses the
within 10 seconds or the transmitter firmware will assume that the user wants to abort the
operation or has walked away from the transmitter. After 10 seconds with no action, the data entry
will time out and the original value of the parameter will be preserved.
If no button presses occur within 60 seconds, menu access will time out and the transmitter will
exit the menu and return to the PV display.

9.2.2 Data Entry

Data entry is performed from left to right. Select a character / digit by pressing  or  buttons,

and then press to advance to the next character position to the right. Select the cross-hatch
▒
character to terminate the entry or if the final character is already a space character, just press
again.
All numeric entries are clamped at the low or high limit if needed. You can determine the low and
high limit for a parameter by selecting either the ▲ or ▼ character while the cursor is positioned
over the left-most digit and press
Screen
Symbol
Display the high limit for this parameter.
▲
This symbol only appears in the left-most
position of the data entry field.
Display the low limit for this parameter.
▼
This symbol only appears in the left-most
position of the data entry field.
▒
Terminate the numeric entry
0 thru 9, These characters are used to enter
Minus, numeric values. The minus sign only
Decimal appears in the left-most digit.
A thru Z,
0 thru 9
Not Available
special
symbols
Revision 10

button to call up the Main Menu. To exit the Main Menu and return to the

button to begin a data entry operation, they must press another button

button. The Display will show the selected limit.
Table 12 – Three-Button Data Entry
Numeric data entry
SMV800 Transmitter User's Manual

button to select an
Text entry
Not Available
Not Available
Terminate the text entry
These characters can be used to
create custom tags and unit labels
These characters can be used to
create custom tags and unit labels

Page 33